EGO CH5500 rapid charger: LED1 is solid red. What does it mean?
Short answer: On the CH5500 rapid charger, LED1 shining solid red means the battery pack is too hot or too cold to charge. Charging starts automatically once the pack is back between 37°F and 135°F (3°C–57°C).
Applies to: EGO CH5500 / CH5500-FC 56V rapid charger. Other EGO chargers use different lights.
What EGO says
"If the battery pack is out of the normal temperature range, LED1 will shine red."
Source: EGO CH5500/CH5500-FC Operator's Manual, "Charging a hot or cold battery pack" (p. 16), LED functions table (p. 15) and Troubleshooting (p. 18). Official PDF
Steps EGO recommends
- Let the battery pack cool down or warm up. EGO says charging begins when the pack returns to 37°F (3°C)–135°F (57°C).
- Leave it on the charger. The manual says the charger will automatically begin charging once the pack is back in range.
If that didn't work: what owners on Reddit say
Not from the EGO manual. These are tips recommended by users on r/egopowerplus. They may help, but EGO doesn't list them. Try them at your own risk, and stop if anything gets hot, smells or sparks.
- Bring a cold battery inside to charge. Users on r/egopowerplus recommend bringing packs left in a cold garage indoors and charging them inside the house. One owner said about 25 minutes on the charger indoors brought theirs back. Never heat a battery to speed this up. (Reddit thread, Dec 2022)
When to stop and contact support
If LED1 stays solid red after the pack has had time to reach a normal temperature, contact EGO Customer Service (1-855-EGO-5656 in the US).
Related questions
Checked against EGO's official manual: November 18, 2026.
This is a convenience reference based on the manufacturer's official manual. Always follow the official manual and safety instructions for your specific model. Tool Decoder is not affiliated with or endorsed by EGO or Chervon. EGO POWER+ is a trademark of its owner. Incorrect procedures can damage equipment or create safety hazards.