My EGO battery charges on one charger but not another: which one is bad?
Short answer: Swap one thing at a time. EGO's manual says that if a different battery pack charges normally on the charger, the first battery is the defective one. If a different battery pack also shows "defective," the charger may be the problem.
Applies to: EGO 56V Standard Charger CH2100 / CH2100-FC.
What the manual says
"If a different battery pack charges normally, dispose of the defective battery pack"
Source: EGO, Operator's Manual, 56-Volt Charger CH2100/CH2100-FC, "Defective Battery Pack or Charger," p. 15. Official PDF
Steps EGO recommends
- Remove the battery pack and put it back in the charger.
- If it still reads defective, try charging a different battery pack.
- If the different battery pack charges normally, the first battery pack is defective.
- If the different battery pack also reads defective, unplug the charger, wait until the red LED goes out, and plug it back in. If it still reads defective, the charger may be defective.
Source: same manual, pp. 15 and 17.
If the steps point to a bad battery or charger
As an Amazon Associate I earn from qualifying purchases.
Only replace a part after the steps above show which one is defective. These are EGO's own (OEM) parts.
- EGO POWER+ 56V 5.0Ah Battery (BA2800T): EGO's own 5.0Ah battery, listed as compatible in the CH2100 manual.
- EGO POWER+ 56V Standard Charger (CH2100): EGO's own charger, the same model this page covers.
When to stop and contact EGO
If you only have one battery and one charger and can't test this way, contact EGO Customer Service at 1-855-EGO-5656 or egopowerplus.com.
Related questions
- Why is my EGO battery flashing red and not charging?
- EGO charger shows a solid red light: what does it mean?
Checked against the manual: November 18, 2026.
This is a convenience reference based on the manufacturer's manual. Always follow the official manual and safety instructions for your specific model. Tool Decoder is not affiliated with or endorsed by EGO or Chervon. Incorrect procedures can damage equipment or create safety hazards.